Heater Sizing
Posted on December 09, 2020
Here are the key bits of information you will need if order to properly size a heater. Proper job sizing is having as much information about your project as possible
BLOG POSTS
Gas Monitors, How important are they?
Posted on December 03, 2020
The use of gas monitors and other detectable equipment is a growing trend. Many jobsites and areas are requiring workers to have some sort of monitor
When and Why to use Anti-Gel Diesel additives
Posted on November 02, 2020
To prevent diesel fuel from gelling (or crystallizing) you should use an anti-gel fuel supplement. Anti-gel additives are easy to use. Just pour ...
AlturnaMats AM48 Ground Protection Mat
Posted on October 13, 2020
AlturnaMats are designed to protect the ground in areas where heavy work traffic, machinery or equipment is used for construction or remodeling where you need the ground or grass protected from damage
10 Steps toward Safety in the Workplace
Posted on October 12, 2020
Workplace safety is good business and must be the shared responsibility of the organization and its employees. With an increased focus on safety, good safety habits begin to take shape.
Geo Tree Concrete Cloth GCCM Project
Posted on September 24, 2020
Imagine being able to use concrete on slopes, in water, and in hard to reach places with no forms, no mixing, and minimal equipment. The city of Rapid City approached ...
Curing Exterior Concrete – The What & The Why, To Do It Correctly
Posted on September 09, 2020
First off, what is concrete curing and why is it important? Curing is the process of allowing the concrete to sustain hydration. Hydration is the reaction of the dry mix materials in concrete, ...
Tips for your Pneumatic Tools
Posted on August 27, 2020
During the busy season one thing that gets forgotten is maintenance on tools and equipment. By doing these things, the time and money
NEW Orange Thunder Hand & Bull Floats from Kraft Tool
Posted on August 13, 2020
Kraft Tool Company has introduced a revolutionary new float line called Orange Thunder™ with KO-20™ technology
Its Hot Outside but Let’s Talk About Heaters Now!
Posted on August 07, 2020
Bierschbach has you covered for all your heating needs, big and small, with a range of options that include indirect fired and direct fired heating, a variety of fuel sources, and ground thaw heaters
The Importance of Call 811 Before You Dig
Posted on July 30, 2020
We all know to “Call 811 before you dig”. There are many reminders out there to do so. This is an important step to take on almost any construction project.
DeWalt - A Cut Above
Posted on July 29, 2020
On any project, contractors will run into some form of cutting. This could be anything from concrete to rebar, or even a plumber cutting pipe. Any of these tasks can be labor intensive, noisy...
Bierschbach Equipment & Supply to Add New Somero SRS-4 Laser Screed® Machine to our Fleet
Posted on June 16, 2020
Bierschbach Equipment & Supply is proud to announce a new product in our Somero® line of Laser Screed® equipment, the SRS-4.
JUNE: NATIONAL SAFETY MONTH
Posted on June 08, 2020
June is National Safety Month and with the opening of businesses, job sites and sales of equipment, Bierschbach Equipment and Supply makes the safety of employees and customers a priority.
Raising the Bar
Posted on June 03, 2020
One of the most important but time consuming jobs in concrete construction is tying reinforcement steel.
DEF- The Importance of Proper Handling
Posted on June 01, 2020
Due to the increase changes of emission restrictions and guidelines. DEF needs to be carefully handled to prevent contamination of the DEF system and engine failure.
NEW Husqvarna K770 Dry Cut System
Posted on May 01, 2020
We proudly introduce our new K 770 Dry Cut from Husqvarna, a Power Cutter specifically designed to offer the possibility to cut dry when wet cutting is not a feasible option.
Choosing the Right Pump
Posted on April 24, 2020
Bierschbach can help with all your dewatering needs. We sell and rent the most expansive line of pumps in the area
HARNESS INSPECTION
Posted on April 13, 2020
It’s not only important to wear your fall protection but it is also just important to inspect your harness for cuts, burns, defects and broken/worn parts before use.
Covid-19 Response #2
Posted on March 31, 2020
We thank you very much for your continued business, especially during this extraordinary time. We appreciate your Partnership. As the Coronavirus COVID-19 situation continues to develop...
COMMUNITY INVOLVEMENT
Posted on March 26, 2020
Community involvement is a subject that is overlooked by most organizations. Community could be defined as a group of people that are gathered to achieve a common goal.
Our COVID-19 Response
Posted on March 18, 2020
We thank you very much for your continued business, especially during this extraordinary time. We appreciate your Partnership. As the Coronavirus COVID-19 situation continues to develop
Deep Cycle Battery Maintenance
Posted on March 12, 2020
With the increased use of battery powered equipment, proper battery maintenance is crucial to extend the life
Common Temporary Heater Problems
Posted on March 04, 2020
Throughout the years we have compiled a list of the most common problems when installing or moving heaters to a new location.
Tencate Mirafi Geotextile Job
Posted on February 14, 2020
Bierschbach location in Rapid City worked with Tencate/Mirafi and decided that the RSi stabilization and separation products instead of a grid
ANSI Required Daily Walk Around Inspections for Aerial Lifts
Posted on February 06, 2020
It is required that the operator of an aerial lift to do a daily walk around inspection.
Temporary Construction Heater Safety
Posted on January 30, 2020
Cold weather construction and temporary heat go hand in hand. Temporary heat allows contractors to continue to work during the colder months to keep projects on track to meet deadlines.
New ANSI & CSA Standard Changes affecting Scissor Lifts and Boom Lifts
Posted on January 13, 2020
Under the new standards, aerial work platforms (AWPs) are now called mobile elevating work platforms (MEWPs).
Avoid Cold Weather Diesel Problems
Posted on December 16, 2019
It’s that time of year again, cooler mornings, frosted windows, which means it’s time to winterize your stored diesel fuel.
JLG SkySense Enhanced Detection System
Posted on November 06, 2019
SkySense is an enhanced detection system from JLG for both boom lifts and scissor lifts.
MUSTANG RELEASES 2 NEW TRACK LOADERS
Posted on February 17, 2017
MUSTANG 1650RT TRACK LOADER Mustang is proud to announce the all-new 1650RT Compact Track Loader
View a PDF of Red River Flooding, Spring 2009 - Fargo, ND.
Posted on February 11, 2010