Materials & Supplies
Manufacturer
W.R.Meadows
Rental
No
Comments
MED-CURE concrete curing aid was specially formulated to supplement the W. R. MEADOWS line of curing compounds and provide the contractor with a good, general purpose curing aid for construction applications where economy is of prime importance. It contains no wax, resin, or solvent.


USES
MED-CURE is ideal as a curing aid, as well as for hardening and dustproofing exposed concrete floor slabs, sidewalks, driveways, beams, columns, etc. It can be used to provide a hard, dust-free surface on concrete floors to be painted or covered by resilient, carpeted, wood, or synthetic flooring.


FEATURES/BENEFITS
Penetrates to aid curing, as well as to harden concrete in one easy application.
Provides a low maintenance, finished surface.
Tint aids in identifying coverage.
Ideal for new, old, interior, exterior, horizontal, and vertical concrete surfaces.
Dries fast and may be recoated if desired.
Application tools may be cleaned with water.
VOC compliant u0085 actual VOC content is 0.


SPECIFICATIONS
Complies with all current federal, state, and local maximum allowable VOC requirements, including U.S. EPA, SCAQMD, and OTC.


TECHNICAL DATA
DRYING TIME u0085 Depends on weather conditions and coverage, but will generally dry in one hour.
FLASH POINT u0085 >212? F.


LEED INFORMATION
May help contribute to LEED credits:
EQ Credit 4.2: Low-Emitting Materials: Paints & Coatings
MR Credit 5.1: Regional Materials: 10% Extracted, Processed & Manufactured Regionally
MR Credit 5.2: Regional Materials: 20% Extracted, Processed & Manufactured Regionally


PACKAGING
5 Gallon (18.93 Liter) Pails
55 Gallon (208.20 Liter) Drums
275 Gallon (1040.99 Liter) Totes


COVERAGE
Broomed Surface: 400 ft.u00b2/gal. (9.82 mu00b2/L)
Troweled Surface: 600 ft.u00b2/gal. (14.73 mu00b2/L)


APPLICATION
Preparationu0085Application equipment must be clean and free of any previously used materials.
Mixing u0085 For optimum performance, gentle mixing or agitation is recommended.
Application Method u0085 New Concrete: Apply MED-CURE as soon as surface water has disappeared and the surface is dry to the touch or hard enough to walk on. Apply one even coat with a pressure hand sprayer or paint roller.
Existing (Old) Concrete: Clean surface thoroughly with a trisodium phosphate solution and rinse thoroughly. Apply MED-CURE after the surface has dried. NOTE: Keep heavy traffic off surface for 24-48 hours after applying MED-CURE.
Cleanupu0085 Application equipment may be cleaned easily with soap and water while still wet.


PRECAUTIONS
DO NOT DILUTE. Do not apply if the temperature of the concrete is less than 40u00ba F (4u00ba C). KEEP FROM FREEZING. If MED-CURE is accidentally sprayed or spilled on glass, brick, aluminum, painted surfaces, etc., flush immediately with water. Do not over-apply.

MED-CURE

Sioux Falls, SD 605-332-4466

Rapid City, SD 605-348-6440

Dickinson, ND 701-483-3184

Fargo, ND 701-492-0855

Sioux City, IA 712-252-0640

Connect with Us
Interested in New Products and Promotions?